联系人：武经理

电话/微信：18210951310

QQ：272121253

为您提供录音棚系统解决方案和技术支持,请按以上方式与我们取得联系

Ferrofish A32 Pro Dante 录音棚数模转换器

64-Channel ESS AD/DA Converter

Up to 24-bit / 192 kHz

32x32 Analogue inputs and outputs, balanced on D-Sub25 (Tascam format)

64 Dante inputs and outputs via dual Ethernet socket with a redundancy function

Balanced 6.3 mm jack stereo main output with dedicated DAC monitoring path

32x32 ADAT inputs and outputs on Toslink sockets with 96 kHz support

WordClock input and output on BNC sockets with jitter reduction circuitry

MIDI input and output on 3.5 mm jack sockets

GPIO connector for unit monitoring and remote preset switching on D-Sub15

2 Stereo headphone outputs: 6.3 mm jack

Multitouch user interface on four TFT screens

Flexible routing matrix

Redundant power supply with a monitoring and alarm function

SHARC DSP for internal signal processing

Dual expansion slots for optional DSP sticks

Remotely controllable via RemoteFish App (Mac & Windows)

Fanless construction

Model: 19" / 1U

技术参数：

Dante I/O

2 x RJ-45 Ethernet connector (CAT5/6 cables),

64 x 64 channel Brooklyn series board built-in.

MADI I/O (AES10)

双SFP插槽MADI:多模或单模SFP模块作为默认配置，可选第二SFP模块可选

64通道@32kHz, 44.1kHz, 48kHz

32通道@64kHz, 88.2kHz, 96kHz

32通道@128kHz, 176.4kHz, 192kHz*

*两个MADI端口均用于实现全32+32通道传输

MIDI对MADI的支持。

延迟:3 samples

冗余:信号丢失时，自动切换光纤<->同轴MADI

模拟输入(AD)

ESS Tech最新一代的模拟/数字转换器。

4 x DSub25 (Tascam格式)

数字增益:+20dBu…- 8dbu, 1dB步进

放大器：OPA1604 / OPA1664

电平显示器：TFT显示屏，28级

模拟输出 (DA)

最新一代的ESS Tech模拟/数字转换器

4 x DSub25 (Tascam format)

数字增益: +20dBu … -8dBu, 1dB steps

OpAmps：OPA1604 / OPA1664

电平指示：TFT screen, 28 levels

耳机输出：

2 x¼”(6.3毫米)立体声TRS插孔，带有HQ放大器部分和专用DAC路径。

提供独立立体声通道。

可选择单声道/立体声或M/S解码源的所有输入和输出。

数字控制音量电平

ADAT I/O

4+4 optical 光纤接口 (8 channels each with 48 kHz)

32 channels @32kHz, 44.1kHz, 48kHz

16 channels @64kHz, 88.2kHz, 96kHz

n/a @128kHz, 176.4kHz, 192kHz

Latency: 3 samples

GPIO Port

4x通用开关预置1-4输入。

4x通用输出，用于监控锁/电源/MADI/Temp警报。

MIDI I/O

2 x 1/8″ (3.5mm) TRS连接器用于远程控制

Conversion MIDI <> MIDI-over-MADI possible

MIDI 2.0 pinout

Wordclock I/O

BNC: 1 x 输入， 1 x 输出

75 Ohm Termination switchable for input

电源供电：

12V, 3A

2 ×输入插孔，带有螺丝锁，用于冗余电源。

电压监控，电源输入故障时屏幕显示警告信息

内部复位polyfuse

包括1 ×电源，第二个电源模块可选

USB Port：1 x USB 2.0 for Remote/Updates

附加功能

192kHz操作(S/MUX高达192kHz)。

GPIO远程预设切换和告警监控端口

DSP Plugin-ready

带有可切换滤波器的A/D和D/A转换器

双耳机输出，方便监听

MIDI over MADI预置管理

广泛的路由/混合的可能性。

冗余(MADI I/O, Dante I/O，电源)。

内部时钟

温度补偿振荡器，精度高。

初始精度:+ / - -1.5 ppm

超温范围:+/-2.5ppm

老化:+ / 1 ppm

PLL

数字控制锁相环/抖动减少系统

输出抖动:50ps…100ps典型

液晶显示器

4 × TFT多触屏用户界面

两层照明触摸敏感高分辨率编码器

高度直观的控制单元

音频处理器核心

SHARC ADSP-2148x series DSP

所有384个音频通道的路由和处理。

源耳机输出。

计算即将到来的音频处理算法

尺寸：

1RU, 无风扇设计

深度: 31cm (12.6”) (包括连接器)

重量：4.1kg (9 lbs)

环境温度：41°F up to 113°F (+5°C up to +45°C)

Ferrofish A32 Pro Dante Multi-format Converter Features:

386-channel multi-format AD/DA, ADAT, MADI, and Dante converter

32 channels of balanced analog I/O in D-sub format, with levels up to +20dBu, adjustable in 1dB steps

32 channels of optical ADAT I/O at up to 96kHz

ADAT can be switched to S/PDIF with built-in sample rate conversion

64 channels of MADI over either an optical or a coaxial connection

64 channels of Dante over dual RJ-45 ports

Word clock I/O keeps your entire digital system in perfect synchronization

MIDI I/O and MIDI-over-MADI for embedding signals and remote control

Headphone output with integrated monitoring matrix for mono, stereo, and sub-mix signals

Low-latency Cirrus Logic technology ensures rock-solid clocking, superior jitter reduction, and ultra-detailed sound

SHARC DSP with floating-point calculation and 80-bit-wide accumulator processes on all channels

Sophisticated routing and mixing of all channels

Intuitive one-knob control operating system and multilingual self-explaining, always-on help system

Time-saving preset management

4 TFT screens yield a detailed, at-a-glance overview of settings and levels

Redundant power outputs supply extra peace of mind

Tech Specs

Type: Multi-format Converter

Computer Connectivity: USB 2.0

Form Factor: Rackmount

Analog Inputs: 4 x DB-25

Analog Outputs: 4 x DB-25, 2 x 1/4" TS

Digital Inputs: 4 x Optical Toslink (ADAT)

Digital Outputs: 4 x Optical Toslink (ADAT)

Headphones: 2 x 1/4" TRS

MIDI I/O: In/Out, 1/8"

USB: 1 x Type B

Data I/O: 2 x RJ45 (Dante), 2 x Optical Toslink (MADI)

Network: Dante, ADAT, MADI

Clock I/O: 2 x BNC

Other I/O: 1 x GPIO, 2 x DSP Stick

Rack Spaces: 1U

Power Supply: 12V DC power supply (included)

Height: 1.75"

Width: 19"

Depth: 10.6"

Weight: 9 lbs.

4 x 4 D-Sub25

8 analog channels on each D-Sub25

TASCAM pin-format, max 192kHz

Gain/Levels: -8dBu…+20 dBu (1dB steps).

MADI I/O: Dual SFP Slots

The two SFP slots allow a variety of configurations:

From a single module configuration to redundant

dual SFP Modes (Single-/Multimode or Coaxial) –

everything is possible.

USB Type-B

For firmware updates, plugin installation and remote control from a host computer. The A32pro Dante appears as a MIDI device.

4 x 4 ADAT TOSLINK

Each ADAT port transfers eight channels at a sample rate of 48kHz (= 32 In + 32 Out). A SMUX/2 mode up to 96k is also possible.

Dante Network I/O (redundant)

Two RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).

2x PHONES STEREO TRS (FRONT)

Monitoring of every stereo/mono or even M/S (Mid/Side) I/O channel by an dedicated DAC path.

Word Clock I/O

BNC with 75 Ohm

internal termination.

On/Off via display.

MIDI I/O

Dual 1/8″ (3.5mm) TRS I/O

(MIDI 2.0 layout)

for remote Control and

MIDI-over-MADI

Redundant Power Supply

Ground-loop free, coaxial DC connector with secure, stable and relaible screw-lock. One PSU is included.